Lexmark 280 Manual do Utilizador descarregar pdf (Página 153)

56 Serial port <x> disabled

• Press the down arrow button until

Continue appears, and then press to clear the message.

The printer discards any data received through the serial port.

• Make sure the Serial Buffer menu item is not set to Disabled.

56 Standard USB port disabled

• Press the down arrow button until Continue appears, and then press to clear the message.

The printer discards any data received through the USB port.

• Make sure the USB Buffer menu item is not set to Disabled.

56 USB port <x> disabled

• Press the down arrow button until Continue appears, and then press to clear the message.

The printer discards any data received through the USB port.

• Make sure the USB Buffer menu item is not set to Disabled.

57 Configuration change, held jobs were not restored

Press the down arrow button until Continue appears, and then press to clear the message.

58 Too many flash options installed

1 Turn the printer power off.

2 Unplug the power cord from the wall outlet.

3 Remove the excess flash memory.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer power back on.

58 Too many trays attached

1 Turn the printer power off.

2 Unplug the power cord from the wall outlet.

Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer power back on.

61 Remove defective hard disk

• Press the down arrow button until Continue appears, and then press to clear the message and continue

printing.

• Install a different hard disk before performing any operations that require a hard disk.

Understanding printer messages

153

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 216 217

Sem comentários

Lexmark 280 Manual do Utilizador Página 153